Pioneer BDP-52FD - Manuel (Page 47)

47
En
07
Software updating
The player’s software can be updated using one of the
methods shown below.
• Connecting to the Internet.
• Using a disc.
• Using a USB memory device.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 7 for
update and service information on your Blu-ray disc
player.
Caution
• Do not unplug the power cord or remove the USB
memory device/disc during software updating.
Otherwise, the updating will be aborted and
malfunction may occur with the player.
• There are two processes for software updating,
downloading and updating. Both processes may take
a certain period of time.
• Other operations are defeated during software
updating. Furthermore, updating process cannot be
canceled.
• When the front panel display is off, turn it on with FL
DIMMER . When updating the player’s software with
the front panel display off, do not unplug the power
cord until the unit turns off.
 Updating connecting to the Internet
Note
• Depending on the Internet connection conditions,
downloading may take a long time.
• Steps 1 to 5 are the operations performed by the user
(they are intended to download the software from the
Internet).
• Steps 6 to 8 are the operations performed
(automatically) by the player (they are intended to
update the software).
1 Connect to the Internet.
2 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU .
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options  Update  Network 
Start.
Use
/ to select, then press ENTER.
5 Select and set Start.
Press ENTER.
6 Downloading of the software start.
The software download status is displayed on the screen.
• Depending on the Internet connection conditions,
software downloading may take a certain period of
time.
7 Updating starts.
• Software updating may take a certain period of time.
8 Updating completes.
 Updating using a USB memory
device/disc
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB memory device or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
• Store the update file in the root directory of the USB
memory device or disc. Do not store it within a folder.
• Do not put any files other than the update file on the
USB memory device or disc.
• To update using a disc, use a CD-R or CD-RW disc.
• The player supports USB memory devices formatted
in FAT32/16. When formatting a USB memory device
on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
memory device or disc.
• Do not use a USB extension cable to connect a USB
memory device to the player. Using a USB extension
cable may prevent the player from performing
correctly.
• Steps 1 to 5 are the operations performed by the user.
• Steps 6 to 7 are the operations performed
(automatically) by the player (they are intended to
update the software).
1 Plug in the USB memory device or load the disc on
which the update file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU .
3 Select and set Initial Setup.
Use / to select, then press ENTER.
BDP-52FD_UCXCNSM_IBD_EN.book 47 ページ ２０１１年８月１９日 金曜日 午後１２時２３分