Now you can see monitor installation & operation – SVAT Electronics VISS7500 Manuel d'utilisation

Page 6

Advertising
background image

www.svat.com

now you can see

MONITOR INSTALLATION & OPERATION

USING THE MONITOR:

• When the monitor is in the OFF mode, pressing the Talk/View button

turns the monitor and outside camera ON. Monitor and camera will

automatically turn off after 1 minute.

*NOTE* The cameras CALL button must be pressed first by the visitor,

followed by the Talk/View button in order to speak with your visitor.

DETERRING UNWANTED VISITORS

If you discover unwanted visitors, pressing the WARNING button on the

monitor will engage a loud siren in the outside camera in

order to deter the visitor.

ADJUSTING PICTURE/VOLUME

Volume and Brightness control knobs are located at the bottom of

the monitor for fine tuning.

DOOR UNLOCK

• This system supports any door strike rated between 12-14V DC. The

door will remain unlocked for 10 seconds. Please refer to the wiring

diagram for installation instructions.

145cm ~ 160cm

AC: 110 ~ 240V

The optimum height of the

monitor for installation is

145cm ~160cm from the

center of the pick-up tube of

the monitor to the ground.

Take two screws and fix the support of the

wall-mount on the wall and then install the

monitor.

Advertising