Sun Microsystems SUN BLADE X6250 - Manuel (Page 27)

19
C H A P T E R
5
Configure the JavaRConsole System
This chapter describes how to set up the JavaRConsole system to deliver the mass
storage drivers and Windows Server 2003 or Windows Server 2008 media for
operating system installation.
Note – If you have chosen both the Floppy Disk Local (only required for Windows
Server 2003 installations) and Windows Local delivery methods in Chapter 3 , proceed
to Chapter 6 .
■ You will need to set up a JavaRConsole system if you have chosen any one of the
following mass storage driver or Windows Server 2003 or Windows Server 2008
media delivery methods described in
Chapter 3 :
■
Floppy Disk Remote
■
Floppy Image (Only available for server modules supporting ILOM. This
method can not be used for server modules using ELOM.)
■
Windows Remote
■ Windows Image
Note – This procedure does not provide detailed instructions for setting up the
JavaRConsole hardware. For Sun Blade server modules with ILOM, see the Integrated
Lights Out Manager (ILOM) Administration Guide for further information. For Sun
Blade server modules with ELOM, see the Embedded Lights Out Manager
Administration Guide for further information. Note that there are multiple versions of
LOM, be sure to refer to the guide that matches your server’s installed version.