Intel Express 510T Manuel d'utilisation
Page 78
68
C H A P T E R 4
Advanced Configuration
68
Changing VLAN mode
To change the mode of operation of a VLAN:
1
Select
VLAN Setup
.
2
Click
Advanced
. The VLAN mode is shown.
3
Click the VLAN mode to see the full range of choices.
4
Click the new mode and make sure the rest of the details are
correct.
5
Click
OK
.
Your switch may turn blue (for a few seconds) while the net-
work stability returns; this is normal.
VLAN Mode
Description
Stand-alone
For single switches: there is no exchange of
information with VLANs on other switches;
each switch is its own domain
(STDALONE).
For switches in a stack: there is an exchange
of information using VLANs between the
switches in the stack; these switches are in
their own domain (STDALONE).
Distributed
A domain is a collection of switches and
can contain up to 128 VLANs. If you select
distributed, each switch will be able to com-
municate with all the others in this domain.
500.book Page 68 Thursday, September 2, 1999 1:30 PM