GE JGP328 - Manuel

30" Sealed Gas Cooktop Installation
Instructions
CAUTION: Before you begin—read these
instructions completely and carefully.
• IMPORTANT—Save these instructions for
local inspector’s use.
• IMPORTANT—OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
• Note to Installer—Be sure to leave these
instructions with the Consumer.
• Note to Consumer—Keep these
instructions for future reference.
• Note—This appliance must be properly
grounded.
Parts Included
1/8" Drill Bit &
Electric or
Hand Drill Phillips
Head
Screwdriver Pencil Ruler or
Straightedge
Saber Saw
2 screws
Tools You Will Need
1
2 Hold
Down
Brackets
Questions? Call GE Answer Center at 800.626.2000
or visit our
Website at: www.geappliances.com
Materials Needed
Foam
Tape
Pipe Wrench
JGP328, JGP932, JGP933
Pipe Fittings
Te flo n Ta pe
Fo
r U se W ith G as
Pipe Sealant
Shut Off Valve
• IMPORTANT: Leak testing of the appliance
shall be conducted according to the
manufacturer’s instructions.
(Glass Top
models only)
229C
4053P520-1
31-10537-1 (04-03 JR)
In the Commonwealth of Massachusetts:
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball-type gas shut-off valves,
they shall be the T-handle type.
• A flexible gas connector, when used, must not
exceed 3 feet.