Geemarc Telephone Ring Amplifier and Flasher CL1 - Manuel (Page 3)

INSTALLATION (See drawing)
1 - Connect the PTT line cord.
2 - At your option you may connect your telephone in the doubler plug.
3 - Connect the PTT doubler plug in the wall socket.
4 - Connect the adaptor line cord.
5 - Connect the adaptor in the wall socket. (*)
(*)
Classified “hazardous voltage” according to EN60950 standard.
Electrical connection : The apparatus is designed to operate from a 230V 50Hz supply
only. (Classified as «hazardous voltage» according to EN60950 standard).
The apparatus does not incorporate an integral power on/off switch. To disconnect the
power, either switch off supply at the mains power socket or unplug the AC adaptor. When
installing the apparatus, ensure that the mains power socket is readily accessible.
Telephone connection : Voltages present on the telecommunication network are classified
TNV-3 (Telecommunication Network Voltage) according to the EN60950 standard.
2 nd CL1
Option :
Special cable to link two CL1
(ref.: CL1RJ11/RJ11)
Option : Shaker
(ref.: SHAKCL_BLK)
1
3
5
2
4
PTT plug
AC adaptor
230V
For product support & help
www.geemarc.com
or Telephone 01707 384438
For product support & help
www.geemarc.com
or Telephone 01707 384438
CL1
CL1
E