Fisher & Paykel CE365D - Manuel (Page 11)

9
Installation instructions
Clearance and cabinetry dimensions
A
B
C
D
C
H
J
I
F
G
E
Clearance and cabinetry dimensions (inches (mm))
CE365D
A
minimum clearance from rear edge of cutout to:
nearest combustible surface
2 3⁄16” (55)
B
minimum clearance from glass surface to:
overhead cabinet centered above the cooktop (unprotected)*
overhead cabinet centered above the cooktop (protected)*
30 ” (762)
24 ” (610)
C
minimum clearance from side edges of cutout to:
nearest combustible surface
2 9⁄16” (65)
D
minimum distance from front edge of cutout to:
front edge of counter
1” (25)
E
minimum clearance from countertop to:
overhead cabinet not directly above the cooktop
18” (457)
F minimum distance between cabinets either side of the cooktop 36” (915)
G maximum depth of overhead cabinetry 13” (330)
H
minimum clearance below top of countertop to:
top of oven installed below cooktop (see Fig.1 and Note #3 following)
top of drawer or other obstruction below cooktop (see Fig.2)
4½ ” (115)
4½ ” (115)
I maximum distance from center rear of cutout to center of junction box** 30” (762)
J minimum clearance below top of countertop to junction box 9” (230)
* See Notes #1 and #2 following.
** This is to allow for adequate slack in the 4’ conduit fi tted on the cooktop.
US
CA