Fisher & Paykel RF201A - Manuel (Page 9)

Installation instructions
3. Ventilation and installation
■ ■
To ensure adequate ventilation for your refrigerator and its correct operation see recommended
cabinetry dimensions below.
■ ■
These measurements do not include space for the water filter at the back of the cabinet as we
recommend that the filter is placed as close to the incoming water supply as possible.
Cabinetry dimensions (including minimum air clearances)
E522B RF201A
inches mm inches mm
A inside height 683/4 1735 711/4 1810
Flush with refrigerator chassis – full door rotation
B inside width 323⁄4 830 37 940
C inside depth 243⁄8 620 243⁄8 620
Flush with refrigerator door – full door rotation
D inside width 337⁄8 860 393⁄8 1000
E inside depth flush to curved door 265⁄8 675 – –
F inside depth flush to flat door 271⁄8 690 271⁄8 690
Flush with refrigerator door – 90° door rotation
(for full drawer/shelf access, the doors need to be open past 90°)
G inside width 353⁄8 900 393⁄4 1010
H inside depth flush to curved door 265⁄8 675 – –
I inside depth flush to flat door 271⁄8 690 271⁄8 690
Minimum clearances
J side clearance 3⁄4 20 3⁄4 20
K side clearance – hinge side flush with door – full rotation 2 50 2 50
L side clearance – hinge side flush with door – 90° rotation 31⁄2 90 31⁄2 90
M rear clearance (incl. evaporator tray) 11⁄8 30 11⁄8 30
N vent (above refrigerator cabinet or around top of cupboard) 2 50 2 50
O door clearance – hinge side flush with chassis – full rotation 253⁄8 645 143⁄8 365
P door clearance – hinge side flush door – full rotation 241⁄4 615 131⁄4 335
US
CA 7