Horizon Fitness CE9.2 - Manuel (Page 15)

15
ASSEMBLY STEp 6
A Open hardware bag 6.
B Align end of lower linK arm with bracket on
bottom of lower handlebar.
C Place teflon washers (v) on both sides of
the lower linK arm. While holding teflon
washers (v) slide lower linK arm into
bottom end of lower handlebar.
D Secure the joint with 1 flat washer (w), 1
spring washer (b),1 bolt (X) and secure
with 1 nut (y).
E Repeat steps B–D on the opposite side of the
elliptical.
SPRING WASHER (B)
15 mm
Qty: 2 TEFLON
WASHER (V)
28.4 mm
Qty: 4 FLAT WASHER (W)
17 mm
Qty: 2
NUT (Y)
Qty: 2 BOLT (X)
70 mm
Qty: 2
HARdWARE bAG 6 CONTENTS :
BOLT (X)
FLAT WASHER (W)
NUT (Y)
LOWER HANDLEBAR
SPRING WASHER (B)
TEFLON WASHERS (V)
LOWER LINK ARM