Panasonic WV-BPR554 Manuel d'utilisation
Vidéo-surveillance Panasonic
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
Ce manuel est liée aux produits suivants:
Table des MATIÈRES
Document Outline
- en
- en
- en g
- 1. Do not attempt to disassemble the camera.
- 2. Handle the camera with care.
- 3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
- 4. Do not use strong or abrasive detergents when cleaning the camera body.
- 5. Clean the CCD faceplate with care.
- 6. Never face the camera towards the sun.
- 0 Auto Iris Lens Connector
- (D Flange-back Adjusting Ring
- 0 Camera Mounting Screw Hole
- ® Down Button ()
- ® Right Button ()
- Q) Left Button (^)
- (D Up Button (cSi)
- (|) Set Button (El)
- # Gen-lock Termination Switch (Hi-Z, G/L 75ii)
- (Q) Power indicator
- Gen-iock Input Connector (GEN-LOCK)
- © Video Output Connector (VIDEO OUT)
- @ Power Cord Socket
- ® RS485 Terminals (RS485 A/B/GND)
- AC/DC Compatible Input Terminal (DC 12V IN/AC 24V IN)
- 1. 12 V DC Power Supply
- 2. 24 V AC Power Supply
- Caution:
- Video Cable
- RS485 Termination Switch Setting
- Installation of Auto Iris Lens Connector
- Mounting the Lens
- Caution for Mounting the Lens
- 2. Setup Operation
- • All Reset Operation
- • RS485 Setup
- • CAMERA Setup
- VERSION FRANÇAISE
- Câble vidéo
- Réglage du commutateur de terminaison RS485
- Installation d’un connecteur pour objectif à diaphragme automatique
- Installation de l’objectif
- Mesure de précaution à prendre lors de rinstallation de l’objectif
- 1. Menu de Configuration de Caméra Vidéo
- • Configuration ade RS485
- • Configuration ade RS485
- ACCESSOIRES STANDARD