Samsung LE32A569P4M - Manuel (Page 25)

English - 
Fine Tuning Analogue Channels
1. Use the number buttons to directly select the channel that you want to fine
tune.
2. Press the MENU button to display the menu. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTER
button.
4. Press the ◄ or ► button to adjust the fine tuning. Press the ENTER
button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*”
on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button and
then press the ENTER button.
Only Analogue TV channels can be fine tuned.
➣
➣
➣
Checking the Digital-Signal Information
You can get information about the signal status.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2. Press the ▲ or ▼ button to select “Signal Information”, then press the
ENTER button.
3. Press the EXIT button to exit.
If the signal status is poor, the “No signal.” message is displayed.
While viewing a Digital channel, this function can be selected. ➣
➣
Channel
Channel Mode : Added Ch.
Child Lock : On
Fine Tune ►
Signal Information
LNA : Off
Channel
Child Lock : On
Fine Tune
Signal Information ►
LNA : Off
Signal Information
Service ID : 0401
Multiplex : (TSID 0004, ONID 20fa)
Network : (ID 20fa)
Bit error level 0
Signal Strength 88
Return Enter
OK
Fine Tune
ATV 6 * Fine Tuned
Reset
Return Save Move Adjust
+ 3
BN68-01409H-00ENG.indb 23 2008-04-28 �� 5:18:21