HP Lame de passerelle de stockage réseau HP StorageWorks X3800sb - Manuel (Page 89)

A Avis de conformité
Cette section contient des avis de conformité concernant la famille de produits HP StorageWorks.
Numéros d’identification de conformité
Pour permettre l'identification et garantir la conformité aux réglementations en vigueur, un numéro
de modèle unique est attribué à votre équipement. Vous trouverez sur l'étiquette du produit le numéro
de série de votre bibliothèque HP StorageWorks MSL, ainsi que les marques et informations
d'homologation requises. En cas de demande d'informations sur la conformité, mentionnez
systématiquement le numéro de modèle. Vous ne devez pas le confondre avec le nom commercial
ou le numéro de modèle du produit.
Informations sur le produit :
HP ________________
Numéro de modèle réglementaire : _____________
Classification FCC et CISPR : _____________
Ces produits contiennent des composants laser. Voir la déclaration Class 1 laser de la section
Réglementation relative au laser .
Réglementation FCC
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established
Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many
electronic devices, including computers, generate RF energy incidental to their intended function and
are, therefore, covered by these rules. These rules place computers and related peripheral devices
into two classes, A and B, depending upon their intended installation. Class A devices are those that
may reasonably be expected to be installed in a business or commercial environment. Class B devices
are those that may reasonably be expected to be installed in a residential environment (for example,
personal computers). The FCC requires devices in both classes to bear a label indicating the interference
potential of the device as well as additional operating instructions for the user.
Étiquette FCC
The FCC rating label on the device shows the classification (A or B) of the equipment. Class B devices
have an FCC logo or ID on the label. Class A devices do not have an FCC logo or ID on the label.
After you determine the class of the device, refer to the corresponding statement.
Matériel de classe A
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
Lame de stockage réseau X1800sb et X3800sb 89