Start the dishwasher, Cancel a cycle, 2 wait about 1 minute while the dishwasher drains – Bosch SHE7PT55UC Manuel d'utilisation
Page 20: 3 open the door and press the [on/off] button, Interrupt a cycle, 1 press the [on/off] button to turn the unit off, Delay start, 1 press the [on/off] button. select a cycle, 2 press [start] to save setting, Cycle completion signal (hidden controls only)
19
Time remaining image
Bosch logo
Language
To change the language of the display following these instructions.
1
Open the door and press the [On/Off] button.
2 Hold down the “A” button and press [Start] until the display indi-
cates “d:00”.
3 Release both buttons. Press the “A” button until the display shows “L:01”.
4 Press the “C” button until the display corresponds with your
requirements.
L:02
= English
L:03
= French
L:07
= Spanish
5 Press [Start] to save and close the door.
Time Light®
Our dishwashers offer a convenient time remaining indicator light that
projects cycle status and time remaining on the kitchen floor.
Note: If the appliance is installed at eye-level, the time remaining informa-
tion is not visible.
In the default setting (S:01) the time remaining shows on the floor
alternating with the Bosch® logo (about 5 seconds per image).
To change setting:
1
Press the [On/Off] button.
2 Hold down the “A” button and press [Start] until the display indi-
cates “d:00”.
3 Release both buttons. Press the “A” button until the display shows “S:01”.
4 Press the “C” button to switch between “S:00” = OFF, “S:01” and
“S:02” = Time Light ON
5 Press [Start] to save the setting.